When it comes to furnace repair and installation in Utah, there are many factors to consider, such as location, climate, type of home, unit type and brand, and the quality of the installation. These factors can greatly impact the cost of purchasing and repairing a furnace system. This guide will explore the average furnace repair and installation cost in Utah, the different types of furnaces available, and common questions and troubleshooting tips related to furnace function.
Average Cost for Installing a Furnace
The factors listed above weigh heavily on what you will spend purchasing and installing your furnace system. For instance, in areas like Utah, you will notice that your furnace will work a lot harder during the colder months compared to an area with warmer winters. Furnace repair and installation in Utah also require a permit which can factor into your overall cost. The price to get a permit can range from 50 dollars to hundreds of dollars, and while that may not be a lot, it can certainly add up. Don’t automatically opt for the cheapest furnace trying to save money because of the likelihood of needing a replacement in a couple of years or just constantly having problems. Spending the money now to buy the best furnace for your home will inevitably save you money on replacement, repairs, and maintenance.
Not only is finding the best option important for your home and loved ones but finding a certified, experienced technician to install it for you is just as important; trying to do it yourself or hiring someone that isn’t a qualified installer can not only be useless but can be damaging to the infrastructure of your home that could lead to other problems. A specific dollar amount for a new furnace is expected to be anywhere from $1,500 to $6,500. That does not include the price of getting a furnace installed or furnace repair in Utah.
Different types of Furnaces
Electric Furnaces are widely used because the only thing you need to have in your home to use an electric furnace is electricity. These furnaces put out heat without all the waste making them energy efficient. Although electricity is a more costly fuel type, electric furnaces don’t release as many toxic byproducts as other combustible-based furnaces.
Gas furnaces are the most popularly used furnaces. They put out a steady stream of gas being piped into your home. They are efficient in the way they generate heat from natural gas. However, natural gas furnaces require a gas line, so if you don’t have one or can’t have one installed, this would not be the best option for furnace repair and installation in Utah.
A propane furnace is an option for people who prefer a combustion furnace but can’t install a natural gas furnace because of a lack of a gas line or other reasons. A con to opting for a propane gas furnace is that while propane is easy to find and affordable, it must be stored in a tank near your property, which can be expensive and inconvenient, especially for people with little space.
Most homes that use oil furnaces more than likely need a properly sized furnace, making their costs high for furnace repair and installation in Utah. An expert can help you reduce your cost by derating your furnace and reducing your power rating. Oil furnaces are also great for people who have space heaters in their homes because they can save money that way as well by utilizing those between oil deliveries. It is important to remember that while installing an oil furnace is cheaper than a natural gas furnace, the fuel is more expensive and fluctuates more.
Common Questions Regarding the Function of Your Furnace
Why is my furnace blower running constantly?
There could be various reasons why your furnace blower is constantly running:
- Your heating system is absorbing unnecessary amounts of energy.
- The fan limit switch could be set on a manual override.
- Your fan limit switch could be faulty and need to be replaced to resolve the issue.
- There could be a problem with your thermostat wiring that could be causing your furnace blower to run continuously.
To troubleshoot, try setting your thermostat temperature lower than the room’s temperature to trigger your furnace cycle to end. Another option is to make sure your thermostat fan is switched to auto or off and not on. If this doesn’t resolve the issue, you’ll likely have to reach out to a professional for furnace repair in Utah.
When do I know to replace my furnace filter?
It’s best to replace your filter once every one to three months. This is important because putting a new filter in your furnace can lead to contaminants such as dust mites, dead skin, pet dander, germs, and so on. This can drastically affect the air you breathe in at home and eventually affect your breathing and well-being.
There are some circumstances where you might want to change your filter more regularly:
- If you are anyone in your home has respiratory challenges
- If you have multiple pets that shed frequently
- Living in a highly polluted area
How do I replace my filter?
- Find your filter compartment.
- Open the door
- Slide out the old filter and throw it away
- Insert your new filter into the slot (Make sure to take off any plastic wrapping and use the arrows on the filter to guide you)
- Place the door back on and make sure it is secure.
What are the different types of furnace filters?
When shopping for a new filter, you’ll notice that there are different sizes of filters, different MERV ratings, and the material of the filter. A MERV rating is based on how many particles it can trap.
What are furnace flame sensors?
The furnace flame sensor is a safety feature located inside the burner assembly. It detects and makes sure a flame is burning inside the unit. If it detects no flame, then it will shut off the furnace to avoid a potential gas leak. In addition, furnace flame sensors help prevent an explosion from happening.
What are the signs of a faulty flame sensor?
Some signs of a faulty flame sensor include:
- The furnace burner will turn on but shut off after a few seconds
- Debris covering the end of the sensor
- The tip of the sensor is black
- The sensor casing is cracked
Furnace repair and installation in Utah can be a significant investment for your home. It is important to consider all factors, such as location, climate, type of home, and the unit type and brand, to ensure you are getting the best option for your needs. Electric, gas, propane, and oil furnaces are all popular options, each with pros and cons. It is also important to hire a certified, experienced technician to repair and install your furnace in Utah to ensure it is done correctly and safely. Additionally, a common understanding of issues and troubleshooting tips related to furnace function can help you maintain and care for your furnace over time. Ultimately, investing in the right furnace and installation and regular furnace repair in Utah can save you money in the long run on replacement, repairs, and maintenance.